34
34
34
Note
: Maintain this pressure for several minutes to improve the
adhesive bond strength.
5.
We recommend that the adhesive flat mount stay on the
surface at room temperature for one day before using to allow
the ultimate strength to be achieved. At room temperature,
approximately 50% of the ultimate strength will be achieved
after 20 minutes, 90% after 24 hours and 100% after 72 hours.
6. Mount the holder / waterproof case onto the adhesive mount. Align
the tripod screw hole on the camera holder / waterproof case to the
screw of the adhesive mount. Screw the knob on the adhesive mount
clockwise to affix the camera to the mount.
7. Loosen the angle adjustment handle and you can rotate the angle
adjustment arm to adjust the capture angle.
8. Tighten the angle adjustment handle after you set the capture angle.
Note
:
Once the adhesive surface is affixed to a device, do not tear it off or
the adhesive performance may be reduced and it may not work well in
subsequent use.
The mounting attachment can be detached from the adhesive mount.
Push the detachable buckle as shown in the illustration to separate the
two parts.
