VTech Go! Go! Smart Wheels 5431 Instruction Manual Download Page 1

Go! Go! Smart Wheels

®

 

Instruction Manual

Battery Removal and Installation

1. 

Make sure the unit is turned 

Off

2. 

Find the battery cover located on the bottom 

of the unit, use a coin or screwdriver to loosen 

the screw and then open the battery cover.

3. 

Remove old batteries by pulling up on one 

end of each battery.

4.  Install 2 new AAA (AM-4/LR03) batteries 

following the diagram inside the battery box. 

(For best performance, alkaline batteries or 

fully charged Ni-MH rechargeable batteries 

are recommended.)

5. 

Replace the battery cover and tighten the screw to secure.

IMPORTANT: BATTERY INFORMATION 

•  Insert batteries with the correct polarity (+ and -).
•  Do not mix old and new batteries.
•  Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
•  Only batteries of the same or equivalent type as recommended are 

to be used.

•  Do not short-circuit the supply terminals.
•  Remove batteries during long periods of non-use.
•  Remove exhausted batteries from the toy.
•  Dispose of batteries safely. Do not dispose of batteries in fire. 

RECHARGEABLE BATTERIES

•  Remove rechargeable batteries from the toy before charging.
•  Rechargeable batteries are only to be charged under adult supervision. 
•  Do not charge non-rechargeable batteries.

PRODUCT FEATURES

1.  On/Off Switch

 

To turn the unit 

On

, slide the 

On/Off Switch

 to the 

On

   position. To turn the 

unit 

Off

, slide the 

On/Off Switch

 to the 

Off

   position.

2.  Automatic Shut-Off

To preserve battery life, the 

Go! Go! Smart 

Wheels

®

 vehicle will automatically shut off 

after approximately 60 seconds without input. 
The unit can be turned on again by pressing 
the 

Light-Up Button

 or pushing the vehicle 

quickly.

NOTE:

 This product is in Try-Me mode in the 

packaging. After opening the package, turn the 
vehicle off and on again to proceed with normal play. If the unit powers down while 
playing, install a new set of batteries.

NOTE:

 Ce produit est actuellement en mode démonstration. Une fois déballé, 

veuillez éteindre puis remettre en marche ce jouet pour activer toutes ses 
fonctionnalités.

1

2

91-004012-004

CA

WARNING: 

All packing materials such as tape, plastic sheets, 

packaging locks, removable tags, cable ties, cords and 

packaging screws are not part of this toy, and should be 

discarded for your child’s safety.

NOTE:  

Please save this Instruction Manual as it contains 

important information

ATTENTION : 

Pour la sécurité de votre enfant, débarrassez-vous de 

tous les produits d’emballage tels que rubans adhésifs, 

feuilles de plastique, attaches, étiquettes, cordons et vis 

d’emballage. Ils ne font pas partie du jouet.

NOTE :  

Il est conseillé de sauvegarder ce manuel d’instructions 

car il comporte des informations importantes.

   WARNING:

Adult assembly required for battery installation. 

Keep batteries out of reach of children.

   ATTENTION :

Les piles ou accumulateurs doivent être installés par un adulte. 

Tenir les piles ou accumulateurs hors de portée des enfants.

Reviews: