manualshive.com logo in svg

VTech ET685, Administrator And Provisioning Manual

Share
Download
VTech ET685 Administrator And Provisioning Manual Download Page 82

Phone Menu Reference

82

Back to Contents

ET685 Administrator and Provisioning Manual

Reboot

Use this menu item to reboot your phone.

1. Press 

  > 

5 Maintenance

 > 

2 Reboot

.

2. At the “Reboot?” prompt, press 

 to reboot or 

  to cancel.

The phone reboots.

Reset Values

Use this menu item to reset your phone to factory default values. 

1. Press 

  > 

5 Maintenance

 > 

3 Reset Values

.

2. Enter your administrator password.

The phone reboots. After rebooting, you will be prompted to select a language, time 
zone, dial tone scheme, and to register an identity.

Summary of Contents for ET685









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands