manualshive.com logo in svg

VTech ET685, Administrator And Provisioning Manual

Share
Download
VTech ET685 Administrator And Provisioning Manual Download Page 19

Provisioning

19

Back to Contents

ET685 Administrator and Provisioning Manual

information sent by a client MUST ignore it (although it may be reported). Servers that 
respond SHOULD only use option 43 to return the vendor-specific information to the client. 
The code for this option is 60, and its minimum length is 1.

The phone sends its type (i.e. VTechET685) via this option to the DHCP server.

NOTE: Vendor class identifier for VTech ET685: VTechET685

Plug & Play

Plug & Play (PnP) provides a proprietory method to enable Auto Provisioning on all VTech 
VoIP phones. By default (Parameter pnp config = on) the phones send SIP SUBSCRIBES 
messages to a multicast address. Any SIP server understanding that message may reply 
with a SIP NOTIFY message containing the Auto Provisioning Server URL where the 
phones can request their configuration from.

SIP Flow

ET685 phones send on boot-up a SIP SUBSCRIBE message to a multicast address:

Sent to udp:224.0.1.75:5060 at 24/12/2001 00:00:19:248 (448 bytes):

SUBSCRIBE sip:MAC%[email protected] SIP/2.0

 

Via: SIP/2.0/UDP 192.168.10.67:5060;rport

 

From: <sip:MAC%[email protected]>;tag=658512961

 

To: <sip:MAC%[email protected]>

 

Call-ID: [email protected]

 

CSeq: 1 SUBSCRIBE

 

Event: ua-profile;profile-type=device;vendor=OEM;model=OEM;version=7.1.19

 

Expires: 0

 

Accept: application/url

 

Contact: <sip:192.168.10.67:5060>

 

Content-Length: 0

If any SIP application within one hop range understands this message a confirmation is 
sent:

Received from udp:192.168.100.10:5060 at 24/12/2001 00:00:19:287 (480 bytes):

SIP/2.0 200 OK

 

Via: SIP/2.0/UDP 192.168.10.67:5060;rport=5060

 

Record-Route: <sip:127.0.0.1;lr;transport=tcp;route-id=fb4fb92b7775c2a7>

 

Record-Route: 

<sip:192.168.100.10;lr;transport=UDP;route-id=fb4fb92b7775c2a7>

 

Contact: <sip:192.168.100.10;transport=TCP;handler=dum>

 

To: <sip:MAC%[email protected]>;tag=91955270

 

From: <sip:MAC%[email protected]>;tag=658512961

 

Call-ID: [email protected]

 

CSeq: 1 SUBSCRIBE

 

Expires: 0 

 

Content-Length: 0

followed by a SIP NOTIFY message containing the Auto Provisioning URL 

Summary of Contents for ET685









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands