manualshive.com logo in svg

VTech ErisTerminal VSP726A, Administrator And Provisioning Manual, Page: 105 / 217

Share
Download
VTech ErisTerminal VSP726A Administrator And Provisioning Manual Download Page 105

Using the WebUI

105

Back to Contents

VSP726A Administrator and Provisioning Manual

Firmware Upgrade

You can update the VSP726A with new firmware using the following methods:

Retrieving a firmware update file from a remote host computer and accessed via a 
URL. This central location may be arranged by you, an authorised dealer, or your 
SIP service provider. Enter the URL under 

Firmware Server Settings

.

Using a file located on your computer or local network. No connection to the 
Internet is required. Consult your dealer for access to firmware update files. Click 

Manual Upgrade

 to view the page where you can manually upgrade the 

VSP726A firmware.

The firmware upgrade settings are also available as parameters in the configuration file. 
See 

“provisioning Module: Provisioning Settings” on page 156

.

Firmware Server Settings

Click the link for each setting to see the matching configuration file parameter in 

“provisioning Module: Provisioning Settings” on page 156

. Default values and ranges are 

listed there.

To update the firmware immediately:

Click 

  or 

.

Setting

Description

Firmware URL

The URL where the firmware update file resides. This should 
be a full path, including the filename of the firmware file.

Handset Firmware URL

The URL where the Cordless Handset Accessory firmware 
update file resides. This should be a full path, including the 
filename of the firmware file.

Server authentication 
name

Authentication username for the firmware server

Server authentication 
password

Authentication password for the firmware server

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

Summary of Contents for ErisTerminal VSP726A


























































































































































































































Reviews:

No comments