VTech ErisTerminal VSP726 Page 77 Administrator And Provisioning Manual Download

Page: 77 / 225

Using the WebUI

Back to Contents

VSP726 Administrator and Provisioning Manual

Speed Dial Keys

Click the link for each setting to see the matching configuration file parameter in

“speed_dial Module: Speed Dial Settings” on page 195

Ringer Settings

The Ringer Settings enable you to provide a distinctive ringing feature via the custom

Alert-Info header associated with an incoming call. This setting overrides the ringer tone

you have set for the account. For example, you can set a unique ringer tone to alert the

VSP726 user upon receiving any incoming calls tagged as "important" in the Alert-Info

header.

The SIP Invite message contains an Alert-Info header that the phone checks in order to

determine which ringer tone to play. The Alert-Info header format is as follows:

Alert-Info: info=info_text

If the header contains the "info" parameter, the phone attempts to match it to the Distinctive

Ringing Text. If there is a match, the associated tone will play. If there is no match, the

default tone for the account will play.

The matching is done on a "first match" basis. In the case of duplicate text strings, the ringer

tone associated with the first matched entry in the Distinctive Ringing Text list will play.

The server-side configuration must be done with your service provider. The SIP Invite text

("Distinctive Ringing Text" on the Ringer WebUI page) must be entered in the format

ringerx

, where x is the ringer number from 1 to 10. For example, to match Ringer 1 enter

ringer1

The ringer settings are also available as parameters in the configuration file. See

“ringersetting Module: Distinctive Ringer Settings” on page 198

After entering information on this page, click

to save it.

Setting

Description

Name

The name associated with the speed dial entry.

Value

The phone number that the speed dial key dials when

pressed and held.

Account

The SIP account that the phone will use to dial the number.

Summary of Contents for ErisTerminal VSP726


































































































































































































































Search results

Summary of Contents for ErisTerminal VSP726

Reviews:

Related manuals for ErisTerminal VSP726

Brands by name

Popular brands

VTech ErisTerminal VSP726, Administrator And Provisioning Manual

Search results

Summary of Contents for ErisTerminal VSP726

Reviews:

Related manuals for ErisTerminal VSP726

Brands by name

Popular brands