VTech ErisTerminal VSP715, Administrator And Provisioning Manual

Page: 77 / 152

Using the WebUI 77
Back to Contents
VSP715 Administrator and Provisioning Manual
Provisioning
Provisioning refers to the process of acquiring and applying new settings for the VSP715
using configuration files retrieved from a remote computer. After a VSP715 is deployed,
subsequent provisioning can update the VSP715 with new settings; for example, if your
service provider releases new features. See also
“Provisioning Using Configuration Files”
on page 86 .
With automatic provisioning, you enable the VSP715 to get its settings automatically—the
process occurs in the background as part of routine system operation. Automatic
provisioning can apply to multiple ErisTerminal products simultaneously.
With manual provisioning on the WebUI, you update the VSP715 settings (configuration
and/or firmware) yourself via
Provisioning > Import Configuration
and/or
Firmware
Upgrade > Manual Upgrade
. Manual provisioning can only be performed on one
VSP715 at a time.
On the Provisioning page, you can enter settings that will enable the VSP715 to receive
automatic configuration and firmware updates. The Provisioning page also allows you to
manually update VSP715 configuration from a locally stored configuration file using an
Import function. You can also export the VSP715 configuration—either to back it up or
apply the configuration to another VSP715 in the future—to a file on your computer.
The provisioning process functions according to the Resynchronization settings and
Provisioning Server Settings. The VSP715 checks for the provisioning URL from the
following sources in the order listed below:
1. PnP—Plug and Play Subscribe and Notify protocol
2. DHCP Options
3. Preconfigured URL—Any ErisTerminal device updated to the latest firmware release will
have the Redirection Server URL available as the default Provisioning Server URL (see
“provisioning.server_address” on page 112 ).
If one of these sources is disabled, not available, or has not been configured, the VSP715
proceeds to the next source until reaching the end of the list.
The provisioning settings are also available as parameters in the configuration file. See
“"provisioning" Module: Provisioning Settings” on page 112 .
Using the Redirection Service requires contacting the ErisTerminal support team
for an account.