VTech ErisTerminal VSP601A User Manual Download Page 10 | Manualshive

Page: 10 / 53

background image

10

Introduction

About this guide

This user guide provides information about the external features of the base

station and handset, installation and handset configuration instructions, and

detailed instructions for using the handset. Please read this user’s manual before

using your handset.
Please refer to the

VSP600A/VSP601A Administrator and Provisioning Manual

for complete configuration instructions.

For customer service or product information, please contact your distributor or

dealer.

Product overview

The VTech VSP600A base station and VSP601A cordless handset is a full-

featured SIP endpoint business phone system designed to work with popular

hosted IP PBX services and on-premise SIP PBXs. Once you have ordered and

configured your PBX service, the handset enables you to make and receive calls

as you would with any other business phone. Up to six cordless handsets can be

registered to the base station. Each handset provides calling features such as

hold, transfer, conferencing, and speakerphone.

The VSP601A cordless handset features include:
•  Orbitlink Wireless Technology™
•  Backlit Liquid Crystal Display
•  Speakerphone, Hold and Mute
•  Up to 6 SIP lines/accounts
•  Up to 4 concurrent calls across all handsets
•

3-way conferencing

• Corded headset support
•

200-entry local directory

«
...
8
9
10
11
12
...
»

Summary of Contents for ErisTerminal VSP601A






















































Reviews:

No comments

Related manuals for ErisTerminal VSP601A

Brand: TAIDE ELECTRONICS Pages: 5

Brand: Uniden Pages: 12

Brand: Jabra Pages: 3

Brand: Goodmans Pages: 7

Brand: Manhattan Pages: 2

Brand: LG-Ericsson Pages: 2

Redmi Buds 4 Pro

Brand: Xiaomi Pages: 8

Brand: Palm Pages: 12

Earglove BlueSport

Brand: Fellowes Pages: 2

Brand: TAGG Pages: 2

Brand: Blumax Pages: 14

Multiline DECT 312

Brand: Alcatel Pages: 22

Brand: Alcatel Pages: 66

Wurger FXR-SAU-12

Brand: Foxxray Pages: 12

Brand: GamesterGear Pages: 13

Brand: Fire Com Pages: 12

Brand: Daewoo International Pages: 31

Brand: Artiste Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands