manualshive.com logo in svg

VTech ErisStation VCS752, Administrator And Provisioning Manual, Page: 47 / 148

Share
Download
VTech ErisStation VCS752 Administrator And Provisioning Manual Download Page 47

Using the WebUI

47

Back to Contents

VCS752 Administrator and Provisioning Manual

Call Hold Reminder

Call Waiting

Setting

Description

Enable Call Hold 
Reminder Tone

Enables or disables the call hold reminder tone. Select to 
enable.

Tone Interval (secs)

Sets the interval for the call hold reminder tone, in seconds.

Setting

Description

Call Waiting Off

When selected, disables incoming call notifications when 
the user is already on a call. Incoming calls are rejected. 
Incoming callers hear a busy signal. When Call Waiting Off 
is selected, and Call Forward Busy is enabled, incoming 
calls are handled according to the Call Foward Busy setting.

Call Waiting On

When selected, enables incoming call notifications when 
the user is already on a call.

Enable Call Waiting Tone

Enables or disables the call waiting tone. Select to enable.

Tone Interval (secs)

Sets the interval for the call waiting tone, in seconds.

Summary of Contents for ErisStation VCS752





















































































































































Reviews:

No comments