Download phonebook
You can download two cell phonebooks to your
DS6673
via
Bluetooth wireless technology. Each cell phonebook stores up
to 1000 entries.
Place your cell phone next to the telephone base when you
download a cell phonebook to your
DS6673
.
Make sure the cell phone is paired to your
DS6673
, on the
device list and connected to the base before you download a cell
phonebook.
For certain cell phones, you may need to press a key on your
cell phone to confirm the phonebook download.
For Android cell phones, you may also download your cell
phone directory to your
DS6673
via the VTech Contact Share
application. Go to
http://www.vtechphones.com/app_contact_share
for
application download.
Certain cell phones do not support SIM card
download. If this is the case, transfer the contacts
from your SIM card to your cell phone memory first.
Then, download from your cell phone memory. For
more information on how to transfer contacts from
your SIM card to your cell phone memory, see the
user’s manual of your cell phone.
Press
MENU
>> Scroll to
Bluetooth
>>
Press
SELECT
.
Scroll to
Download PB
>> Press
SELECT
.
The handset displays
CHOOSE DEVICE
briefly >> Scroll to the desired device >>
Press
SELECT
.
The handset flashes
Downloading...
During
the download process, the handset displays
the progress. All other idle system handsets
display
Downloading...
When the downloading process completes,
the handset displays
Entries added: XXX
for a few seconds and then returns to the
Bluetooth menu.
•
•
•
•
•
1.
2.
3.
4.
Quick start guide
DS6673-6C
Introduction
This quick start guide provides you with basic installation and
setup instructions.
You may refer to the
Abridged user’s manual
provided in the
product package for installation and operation instructions, or see
the online
Complete user’s manual
at
www.vtechphones.com
for
complete installation and operation instructions.
Using the handset menu
Press
MENU
.
Press or until the screen displays the
desired feature menu.
Press
SELECT
to enter that menu.
To return to the previous menu, press
CANCEL
.
To return to idle mode, press and hold
CANCEL
.
Set date and time
If you subscribe to caller ID service, the date and time are set
automatically with each incoming call. You can also set the date
and time manually.
Press
MENU
>> Scroll to
Set date/time
>> Press
SELECT
.
Enter month (
MM
), date (
DD
) and year (
YY
) >> Press
SELECT
.
Enter hour (
HH
) and minute (
MM
) >> Press /
for
AM
/
PM
>> Press
SELECT
.
1.
2.
3.
•
•
1.
2.
3.
Headset charging
Set number of rings
You can set the answering system to answer an incoming call after
2, 3, 4, 5 or 6 rings; or toll saver.
Press
MENU
>> Scroll to
Answering sys
>>
Press
SELECT
.
Scroll
to
Ans sys setup
>> Press
SELECT
.
Scroll to
# of rings
>> Press
SELECT
.
Scroll to choose
6, 5, 4, 3, 2
or
Toll saver
>>
Press
SELECT
.
Record your own announcement
You can use the preset announcement to answer calls, or replace
it with your own recorded announcement.
Press
MENU
>> Scroll
to
Answering Sys
>>
Press
SELECT
twice.
Press
7
to start recording.
After the tone, speak towards the handset microphone.
Press
5
when done.
Bluetooth setup
To use a Bluetooth enabled cell phone with your
DS6673
, you
must first pair and connect your Bluetooth cell phone(s) with the
telephone base. All
DS6673
handsets can be used to make or
answer calls on the cell lines.
Bluetooth wireless technology operates within a short range (a
maximum of approximately 30 feet). When you pair a Bluetooth
cell phone to the telephone base, place your Bluetooth cell phone
closer to the telephone base to maintain sufficient signal strength.
For optimal performance, keep your cell phone within 15 feet of the
telephone base while using the cell line.
Pair and connect your first Bluetooth cell phone
Before you begin, make sure you have cellular coverage
and your Bluetooth enabled cell phone is not connected
to any other Bluetooth device.
Press and hold
CELL 1
or
CELL 2
on the
telephone base for about four seconds. You
hear two beeps and the
CELL 1
or
CELL 2
light blinks.
Turn on the Bluetooth feature of your cell
phone. Once your cell phone finds your
VTech phone (
VTech
DS6673
), press
the appropriate key on your cell phone to
continue the pairing process.
Your cell phone may prompt you to enter
the PIN of the telephone base. The default
PIN of the telephone base is
0000
.
When the cell phone is connected to the
telephone base, you hear two beeps.
The corresponding status icon (
1
or
2
)
displays. The corresponding device light
(
CELL 1
or
CELL
2
) turns on.
If you have trouble pairing your cell phone, it may not
be compatible with your DS6673. Check the Bluetooth
compatibility list at www.vtechphones.com.
The pairing process may take up to one minute. If the pairing
process fails, try again.
The steps for the pairing process may vary for different cell
phones. If this happens, follow the prompts on your cell
phone and your
DS6673
to complete the pairing process.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
•
3.
•
•
i
HANDSET 1
10:01
AM
01/02
ANS ON
1
2
Telephone base
Charger
DSL filter
Click!
Plug!
Plug!
Click!
Plug!
Battery installation and charging
Install the battery as shown below.
1
Charge for at least 30 minutes before initial settings.
Charge for 12 hours before initial use.
Batter
y
Pa
ck / Bloc
-piles
:
(2.4V Ni-MH
)
W
ARNING /
A
V
ERTISSEMENT
:
DO NO
T BURN OR PUNC
TU
R
E
B
A
TT
ERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / F
abriqué en chine
TH
IS
S
ID
E
U
P
/ C
E
CÔ
TÉ
V
ER
S
LE
H
A
U
T
CR1232
Batter
y
Pa
ck / Bloc
-piles
:
(2.4V Ni-MH
)
W
ARNING /
A
V
ERTISSEMENT
:
DO NO
T BURN OR PUNC
TU
R
E
B
A
TT
ERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / F
abriqué en chine
TH
IS
S
ID
E
U
P
/ C
E
CÔ
TÉ
V
ER
S
LE
H
A
U
T
CR1232
Batter
y
Pa
ck / Bloc
-piles
:
(2.4V Ni-MH
)
W
ARNING /
A
V
ERTISSEMENT
:
DO NO
T BURN OR PUNC
TU
R
E
B
A
TT
ERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / F
abriqué en chine
TH
IS
S
ID
E
U
P
/ C
E
CÔ
TÉ
V
ER
S
LE
H
A
U
T
CR1232
Batter
y
Pa
ck / Bloc
-piles
:
(2.4V Ni-MH
)
W
ARNING /
A
V
ERTISSEMENT
:
DO NO
T BURN OR PUNC
TU
R
E
B
A
TT
ERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / F
abriqué en chine
TH
IS
S
ID
E
U
P
/ C
E
CÔ
TÉ
V
ER
S
LE
H
A
U
T
CR1232
2
Light on!
1
2
1
2
>Bluetooth
ANS ON
1
2
>Download PB
ANS ON
CHOOSE DEVICE
>1:Cell Phone A
1
2
ANS ON
CHOOSE DEVICE
>2:Cell Phone B
1
2
ANS ON
Downloading...
8
1
2
ANS ON
Entries added:
118
1
2
ANS ON
Telephone base and charger installation
Install the telephone base and charger as shown below.
Charge for 3 hours before initial use.
IMPORTANT!
Refer to the online
Complete user’s manual
for a full set of installation
and operation instructions. For manual download or customer service,
visit our website at
www.vtechphones.com
or call
1 (800) 595-9511
.
In Canada, go to
www.vtechcanada.com
or call
1 (800) 267-7377
.
If you subscribe to telephone service from a cable company
or a VoIP service provider, contact your cable/VoIP service
provider for more information.
IMPORTANT:
Check for a dial tone by pressing
/HOME
,
CELL 1
or
CELL 2
.
If you hear a dial tone, the installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are
properly done.
It may be a wiring problem. If you have changed your telephone
service to digital service from a cable company or a VoIP service
provider, the telephone line may need to be rewired to allow
all existing telephone jacks to work. Contact your cable/VoIP
service provider for more information.
•
•
Plug!
Batter
y
Pa
ck / Bloc
-piles
:
(2.4V Ni-MH
)
W
ARNING /
A
V
ERTISSEMENT
:
DO NO
T BURN OR PUNC
TU
R
E
B
A
TT
ERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / F
abriqué en chine
TH
IS
S
ID
E
U
P
/ C
E
CÔ
TÉ
V
ER
S
LE
H
A
U
T
CR1232
Batter
y
Pa
ck / Bloc
-piles
:
(2.4V Ni-MH
)
W
ARNING /
A
V
ERTISSEMENT
:
DO NO
T BURN OR PUNC
TU
R
E
B
A
TT
ERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / F
abriqué en chine
TH
IS
S
ID
E
U
P
/ C
E
CÔ
TÉ
V
ER
S
LE
H
A
U
T
CR1232
3
Click!
Light on!
4
The
Bluetooth
®
word mark and logos are owned by Bluetooth SIG, Inc. and any
use of such marks by VTech Holdings Limited is under license.
VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks
and trade names are those of their respective owners.
Specifications are subject to change without notice.
© 2014 for VTech Communications, Inc.
All rights reserved. 04/14. DS6673-6C_QSG_V1.0.
Document order number: 96-010003-010-100
