manualshive.com logo in svg

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual, Page: 58 / 99

Share
Download
VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download Page 58

54

Telephone operation

Reassign a speed dial entry

You can reassign a speed dial entry using a handset or the telephone base.

To edit an entry:

Search for the desired entry in the speed dial directory (see 

Review the 

speed dial directory

 on page 52).

When the desired entry appears, press the 

REPLACE

 softkey. The screen 

shows the directory listed in chronological order.
Press   or   on the handset or 

/

CID

 

or 

/

DIR 

on the telephone base to 

browse and select another desired entry, then press the 

ASSIGN

 softkey 

to confirm your selection.
Press 

OFF

 on the handset or 

CANCEL

 on the telephone base to exit to 

the previous menu.

Delete a speed dial entry

You can delete a speed dial entry using a handset or the telephone base. 

Once a speed dial entry is deleted, it cannot be retrieved.

To delete an entry:

Search for the desired entry in the speed dial directory (see 

Review the 

speed dial directory 

on page 52).

When the desired entry appears, press the 

DELETE

 softkey. The screen 

then shows the speed dial directory.

1.

2.

3.

4.

1.

2.

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Reviews:

No comments