VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download Page 50

Page: 50 / 99

Telephone operation

Press

OFF

to exit to the previous menu.

Create a new directory entry (continued)

Using the telephone base:

Press the

MENU

softkey when the telephone base is

not in use.
Press

CID

DIR

to select

DIRECTORY

and then

press the

SELECT

softkey.

Press

CID

DIR

to select

Add contact

, then

press the

SELECT

softkey. The screen shows

ENTER NUMBER

Use the dialing keys (

) to enter the number.

Press

CANCEL

to backspace and erase a digit.

Press and hold

CANCEL

to return to the idle mode.

Press

CID

to move the cursor to the left or

DIR

to the right.

Press the

PAUSE

softkey to insert a dialing pause

appears).

Press the

NEXT

softkey to move to the name. The

screen shows

ENTER NAME

Use the dialing keys (see page 47) to enter the name.

Press

CANCEL

to backspace and erase a character.

Press and hold

CANCEL

to return to the idle mode.

Press

CID

to move the cursor to the left or

DIR

to the right.

Press the

SAVE

softkey to save, then the screen shows the

saved directory.
Press

CANCEL

to exit to the previous menu.

•
•
•

•

•
•
•

Answering sys

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Search results

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone

Reviews:

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual, Page: 50 / 99

Search results

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone

Reviews: