29
Answering system settings
Message alert tone
When the answering system is turned on, the telephone base beeps every
10 seconds to alert you of new messages. The tone stops when all new
messages have been reviewed.
To change the setting:
Using the telephone base:
Press the
MENU
softkey when the telephone base is not in use.
Press the
SELECT
softkey to select
Answering sys
.
Press
/
CID
or
/
DIR
to select
Mailbox 1
or
Mailbox 2
,
then press the
SELECT
softkey. The corresponding
icon,
1
or
2
,
flashes on the screen.
Press
/
CID
or
/
DIR
to select
Ans sys setup
, then
press the
SELECT
softkey.
Press
/
CID
or
/
DIR
to select
Msg alert tone
, then
press the
SELECT
softkey.
Press
/
CID
or
/
DIR
to select
On
or
Off
, then press
the
SET
softkey to confirm your setting or press
CANCEL
to exit to the previous menu without making
any changes.
Using the handset:
Press the
MENU
softkey when the handset is not in use.
Press the
SELECT
softkey to select
ANSWERING SYS
.
Press or to select
Mailbox 1
or
Mailbox 2
, then
press the
SELECT
softkey. The corresponding icon,
1
or
2
, flashes on the screen.
Press or to select
Ans sys setup
, then press the
SELECT
softkey.
Press or to select
Msg alert tone
, then press the
SELECT
softkey.
Press or to select
On
or
Off
, then press the
SET
softkey to confirm your setting or press the
BACK
softkey to exit to the previous menu without
making any changes.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1
BACK
SET
MSG ALERT TONE
On
Off
1
BACK SELECT
ANS SYS SETUP
#
of rings
Remote code
Msg alert tone
The answering system must be turned on for the message alert tone
to function.
1
# of rings
Remote code
Msg alert tone
SELECT
1
MSG ALERT TONE
On
Off
SET
