VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download Page 17

Page: 17 / 99

Handset settings

Key tone

You can turn the key tone feature on or off.

To change the settings:

Press the

MENU

softkey when the handset is not

in use.
Press or to select

SETTINGS

, then press the

SELECT

softkey.

Press or to select

Key tone

then press the

SELECT

softkey.

Press or to choose

Off

. Press the

SET

softkey to save, or press the

BACK

softkey

to exit to the previous menu.

Set date/time

The answering system announces the day and time of

each message prior to playing it. If you subscribe to caller

ID service

from your telephone service provider,

the day,

month and time are set automatically with each incoming

call. However, the year must be correct so that the day of

the week can be calculated from the caller ID information.

Before using the answering system, set the date and time

as follows.

To adjust the date and time:

Press the

MENU

softkey when the handset is not

in use.
Press or to select

SETTINGS

, then press the

SELECT

softkey.

Press or to select

Set date/time

, then press the

SELECT

softkey.

Press the dialing keys (

) to enter a two-digit number

or press or until the screen displays the correct

value. Press the

SET

softkey to advance.

Repeat step 4 until the date and time are set.

If the date and time are not set, the system announces,

“Time and day not set,”

before each message plays.

SETTINGS

Clear voicemail

Key tone

Set date/time

BACK SELECT

BACK

SET

KEY TONE



Off

SETTINGS

Key tone

Set date/time

Home area code

BACK SELECT

BACK

SET

SET DATE

12/31/09
MM/DD/YY

BACK

SET

SET TIME

03:45 AM

BACK SELECT

SETTINGS

BACK SELECT

SETTINGS

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Search results

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone

Reviews:

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual, Page: 17 / 99

Search results

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone

Reviews: