manualshive.com logo in svg

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual, Page: 12 / 99

Share
Download
VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download Page 12

8

Getting started

CHARGE 

light

On when the handset is charging in the telephone 

base (page 4).

 

(line 2/flash)

Press to make or answer a call on line 2.
During a call, press to receive an incoming call on 

line 2 when you receive a call waiting alert (page 31).

OFF

During a call, press to hang up (page 30).
Press and hold while the telephone is not in use to 

erase the missed calls indicator (page 56).
Press to delete a digit or character while entering a 

number or name.
While in a menu, press to return to the previous 

menu or press and hold to return to the idle mode.

#

Press repeatedly to show other dialing options when 

reviewing a call log entry (page 58).

INT

 (intercom)

Press to initiate an intercom conversation (page 37) 

or transfer a call (page 40).

HOLD

Press to put a call on hold (page 32).

Handset layout (continued)

Headset

 jack

Plug in a wired headset for handsfree telephone 

conversation (page 6).

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Reviews:

No comments