VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download

Page: 11 / 99

Getting started

Softkeys (2)

Press to select a menu item displayed above the key.

/VOL

(directory/volume)

Press to enter the directory when the telephone is

not in use (page 48).
While in a menu, press to scroll up.
During a call or message playback, press to increase

the listening volume (page 31 or 63).

(speakerphone)

Press to make or join a call using the first available

line, starting with line 1 (page 30).
Press to answer a call.
During a call, press to switch between speakerphone

and handset use (page 31).

CID /VOL

(caller ID/volume)

Press to review the call log when the telephone is

not in use (page 57).
While in a menu, press to scroll down.
During a call or message playback, press to

decrease the listening volume (page 31 or 63).

While reviewing a call log entry, press repeatedly to

add or remove 1 in front of the telephone number

before dialing or saving it in the directory (page 58).

REDIAL/PAUSE

Press to review the redial list (page 35).
While dialing or entering numbers into the directory,

press and hold to insert a dialing pause (pages 30

and 45).

TONE

Press to switch to tone dialing temporarily when

using the pulse service (page 33).

(line 1/flash)

Press to make or answer a call on line 1.
During a call, press to receive an incoming call on

line 1 when you receive a call waiting alert (page 31).

Handset layout

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Search results

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone

Reviews:

Related manuals for DS6151 - 6.0 Expandable Cordless Phone

Brands by name

Popular brands

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual

Search results

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone

Reviews:

Related manuals for DS6151 - 6.0 Expandable Cordless Phone

Brands by name

Popular brands