How the system works
* The combination of sensors depends on the package you purchased.
DM271 Baby monitor
Receive alerts on your
parent unit when there’s
activity in your child’s
room – from an open door
or window to movement in
the crib.
Motion Sensor
Lets you know when
there are visitors,
intruders, or pets
moving around your
home.
Open/Closed Sensor
Apply this magnetic
Open/Closed Sensor to a
door, window, or medicine
cabinet to know if it is
open or closed.
4
Check and locate
Check the motion sensor
before use
Test the sensor signal
strength
NOTES
If
No signal
or
Weak signal
message is displayed in sensor
setup mode, or if you do not
receive an alert when you open
the door, move the base closer to
the mounting location or move the
sensor closer to the base.
Use adhesive tape to hold the
sensor temporarily in place.
•
•
Use your parent unit to enter
the
Sensor settings
menu, and
then select the
Check signal
menu. Follow the steps to test
the sensor’s signal strength, and
then exit the sensor setup mode.
Make sure there is a good signal
received when there is motion.
Refer to
Sensor notifications
section in the User’s manual for
the alerts.
If your package includes
a Motion Sensor, please
read the following
section.
Motion Sensor
installation
1
Parts checklist
1 set for DM271-110
Motion Sensor
Screw for
mounting
brackets x 2
Anchor for
mounting
brackets x 2
Open the battery
compartment case
2
Power
The Motion Sensor detects motion
with one-minute cool off time.
Once motion is detected, the
sensor will only start to detect
motion again after one minute.
The Motion Sensor is more
sensitive in detecting motions
crossing the space in front of the
sensor than that moving towards
the sensor.
The Motion Sensor can detect
motion occurring at distances up
to
40 feet (12 meters)
when it is
mounted at a height of
7.9 feet
(2.4 meters)
.
It is recommended to mount the
sensor at the height between
6.2 feet (1.9 meters)
and
7.5 feet
(2.3 meters)
for optimal detection
coverage.
For motion detection of babies
or pets:
If you use the Motion Sensor only
to detect the motion of babies or
pets, you can mount the sensor
at a lower position to shorten
the minimum distance before
reaching the detection area. It is
recommended to mount it at the
height
3.3 feet (1 meter)
for optimal
detection of babies or pets.
Up to 34.4
feet
(10.5 meters)
Side view
Detection
area
78
o
Top view
Shooting area
19.7 inches
60 degrees
22.8 inches
Shooting area
19.7
inches
50 degrees
18.3
inches
63 inches
87
o
Detection
area
1.3 feet
(0.4 meter)
10
o
Height: 6.9 feet (2.1 meters)
Height: 6.9 feet (2.1 meters)
Detection
area
78
o
87
o
Detection
area
0.7 feet
(0.2 meter)
10
o
Height: 3.3 feet (1 meter)
Up to 16.4
feet
(5 meters)
Height: 3.3 feet (1 meter)
Top view
Side view
Baby Monitor installation
1
Parts checklist
2
Connect
Parent unit
Test your baby monitor
3
Check and Locate
3
2
THIS SIDE UP
3
2
THIS SIDE UP
3
2
THIS SIDE UP
3
2
THIS SIDE UP
Battery compartment cover
Battery
Parent unit adapter
Baby unit
Baby unit adapter
Positioning your baby monitor
Install the battery
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
CAUTION
Keep the baby unit out of the reach of the baby. Never place
or mount the baby unit inside the baby’s crib or playpen.
Do not expose the baby unit to extreme heat or direct sunlight.
•
•
1 set for DM271/DM271-102/DM271-110
At least 1 meter
(3 feet)
At least 1 meter (3 feet)
Press
to turn on the
projector.
It projects some colorful
images to the environment.
Adjust the angle of the baby
unit so that the images are
clearly projected to the
ceiling or a wall.
At least 1 meter
(3 feet)
At least 1 meter (3 feet)
Connect the baby monitor
3
Motion Detection
NOTE
The numerical values in the
illustrations are for conceptual
reference only. The actual angles
and distances may vary upon the
change in the mounted height of
the sensor.
•
Install Motion Sensor Battery
NOTES
Use only CR123A Lithium Battery.
When inserting Battery, ensure
polarities are correct.
The Motion Sensor is already
pre-registered to the baby monitor.
For proper operation, use battery
within the following temperature
range: 0°F (-18°C) and 120°F (49°C).
•
•
•
•
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
Unscrew.
6
2
5
1
8
4
7
3
6
2
5
1
8
4
7
3
Lithium battery
Double-sided
mounting tape
Screw for
back cover x 3
Anchor for
back cover x 3
Mounting bracket
on mounting base
with screw
