VTech CTM-A2415, Master User Manual

Page: 34 / 40

EN - 34
Appendix
Energy-saving charging mode
When this mode is activated, all telephone
functions, except handset battery charging, will
be disabled.
To activate the energy-saving
charging mode in A1410/A1420:
1. Unplug the telephone base power adapter
from the power outlet. Unplug the telephone
line cord from the telephone wall jack. Make
sure all handsets are plugged with charged
batteries before proceeding.
2. While you press and hold /FIND
HANDSET
, plug the telephone base power
back to the power outlet.
3. After about 20 seconds, when the IN
USE light starts flashing, release
/FIND
HANDSET and then press it again within
2 seconds. When the telephone base
successfully enters the energy-saving charging
mode, all keys on the telephone base should
not respond.
4. Press *331734# and then press
HOLD to
deregister each handset manually.
When the phone successfully enters the
energy-saving mode, the
IN USE light
turns off and you hear 3 rising beeps.
When the phone fails to enter this mode,
repeat Step 1 through Step 4 above.
NOTE
The telephone base will be powered up as
normal if you fail to press /FIND HANDSET
within 2 seconds in Step 3.
To deactivate the energy-saving
charging mode:
Unplug the telephone base adapter from the
power outlet. Then plug the telephone base
power adapter and the telephone line cord
back in. Then the telephone base is powered
up as normal.
Register the handsets back to the telephone
base. See page 23 for handset registration
instructions.
To activate the energy-saving
charging mode in a cordless handset
(C3100/C3200):
When a registered cordless handset is idle,
press *331734# and then press HOLD. You hear
3 rising beeps. Then put this handset into the
charger (C3000).
To deactivate the energy-saving
charging mode:
Register the handset back to the
corresponding telephone base. See page
16 for handset registration instructions.
Maintenance
Taking care of your telephone
Your telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For
your own safety, take caution when using
electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic
casing that should retain its luster for many