84
Answering system
Answering system setup
Call intercept
When a caller is leaving a message on your general mailbox, you can stop the
recording and talk to the caller by pressing the corresponding line key (
LINE 1
-
LINE 4
). Choose whether private incoming messages can be intercepted by the
console during recording.
When the console is idle, press
MENU
/SELECT
.
Press or to scroll to
Ans sys setup
, then press
MENU/
SELECT
or
/SKIP
.
Press or to scroll to
Call intercept
, then press
MENU/
SELECT
or
/SKIP
.
4. Press or to choose
On
or
Off
.
5. Press
MENU/
SELECT
or
/SKIP
to save the setting and return to the
previous menu. To exit without making changes, press
CANCEL
or
/REPEAT
.
Set remote access code
Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from
000
-
999
. This code is
000
by default.
When the console is idle, press
MENU
/SELECT
.
Press or to scroll to
Ans sys setup
, then press
MENU/
SELECT
or
/SKIP
.
Press or to scroll to
Remote access
, then press
MENU/
SELECT
or
/SKIP
.
4. Use the dialing keys to enter a three-digit remote code.
Press
DELETE
to delete a digit.
Press
/REPEAT
or
/SKIP
to move the cursor to the left or right.
Press
MENU/
SELECT
to save the setting and return to the previous menu.
To exit without making changes, press
CANCEL
.
1.
2.
3.
1.
2.
3.
•
•
5.