manualshive.com logo in svg

VTech AM18447, User Manual, Page: 62 / 122

Share
Download
VTech AM18447 User Manual Download Page 62

53

Telephone operation

Options while on calls

Recording a call

Use this feature to record two-way phone conversations, conferences or 
intercom calls. The recording is treated the same as memos and is marked as 
a new message in the general mailbox. Listen to recorded conversation the 
same way as incoming messages or memos (see 

Message playback 

on  

page 86).

To record a call:

While on a call, press 

MENU

/SELECT

.

Press 

MENU/

SELECT

 or

or 

/SKIP 

to start recording.

The recording starts and the screen shows

 -Rec

. Both the console user and 

the far-end party hear a beep sound.

NOTE: 

To ensure that you are in compliance with any federal or state regulations regarding 

recording a telephone call, you should start the recording process and then inform the other 
party that you are recording the call.

To stop recording:

Place the corded handset back to the console, or press 

SPEAKER

   to hang 

up if you are using the speakerphone.

-OR-

Press 

MENU

/SELECT

 

twice during the recording. The system saves the 

conversation into the general mailbox. 

1.
2.
3.

Summary of Contents for AM18447



























































































































Reviews:

No comments