- 6 -
Quick Installation Guide
CAM 2
CAM 1
Power module
Controller
Main unit
ATTENTION
•
Please do NOT flush the main unit, lenses, power module, and wired controller with
the high-pressure water gun.
•
Do not bend the cable nor twist the connector during installation.
•
The position of the main unit and lens cable should be away from the high-voltage
circuit like xenon lamp, ignition plug etc.
•
If your motorcycle is a traditional carburetor system please try to change a suitable
R-value ignition plug when you meet the interference phenomenon.
If you failed to connect to the camera, please check if you have any pop-up tips to notify you there is
no internet for the connected wifi network and if you will stay connected. Just say YES and everything
will work great. Some may have no this kind of notification, so we recommend you
Turn Off Cellular
Data
when using the WiFi app.
Contact seller if it encounters an error when setting the SSID.
