Installing Your Sprayer
Without a wiring harness running from cab to sprayer, installation is a breeze. Simply
set your sprayer on the truck and strap, bolt or chain it down. Yes, it really is that
simple!
There is a digital version of this manual that can be accessed by hitting the “Getting
Started/FAQ” button on the “profile” tab of your VSI Spray Control app. There is also a
“tech support” button that you can hit and it will pre-populate an email with your sprayer
and other info, type your issue above that pre-populated data so our engineer can
review and find a solution and so your salesperson can follow up with you with the right
information.
Before First Use- VERY IMPORTANT
Your spray unit will heavily rely on the onboard deep cell battery. That is why we have
included an onboard charger/battery maintainer. Before first use, plug this in overnight
or until fully charged. The batteries do not come fully charged from the factory. Please
also keep this battery maintained. It is strongly suggested that the sprayer be plugged in
between uses to keep the battery in peak condition. Remember that lead acid batteries
can lose as much as 2% of their charge per day even when sitting idle, this is why we
include the on board battery maintainer and handy built in plug, to keep the batteries
charged and ready for use at all times as pictured below.
After your battery is fully charged, the next most important step is to go to the “profile”
page of the app and connect your sprayer to the nearest WiFi to where it will be
