Comb Guides
This appliance is supplied with 8 comb guides and a left and right
ear taper guide:
Cutting Length
Grade
3mm
#1
6mm
#2
9.5mm
#3
13mm
#4
16mm
#5
19mm
#6
22mm
#7
25mm
#8
• To attach a comb guide, ensure the appliance is switched off.
Position the comb guide over the front of the clipper blade and
slide over the head. Push and click the rear of the comb guide into
position (see Fig.1).
• To remove the comb guide, ensure the appliance is switched off.
Push the tab on the rear of the comb guide away from the head
and lift off (see Fig.2).
The appliance is also supplied with 2 taper guides
The taper guides can be used above the ear to get a clean line.
• Attach either the left or right guide depending on which ear you
are cutting above.
Fig.1
Fig.2