manualshive.com logo in svg

VRmagic Eyesi, Installation And Operating Manual, Page: 48 / 80

Share
Download
VRmagic Eyesi Installation And Operating Manual Download Page 48

There are two different surgical interface heads. The eye of the vitreoretinal head 
has two incisions, the eye of the cataract head has eight incisions.

Fig. 41: Incisions of the surgical interface heads

1  

Vitreoretinal head

2  

Cataract head

5.10 Using the Foot Pedals

The Eyesi Surgical simulator comes with two foot pedals:

 

• Instrument foot pedal

 

• Microscope foot pedal

 

Â

Please refer to the Eyesi Surgical user guide for further information on the foot 
pedal functions.

Instrument Foot Pedal

The instrument pedal allows you to operate the handpieces with your foot and to 
switch between OR machine presets. The simulator system software handles the 
assignment of instrument pedal functions.

Microscope Foot Pedal

The microscope pedal allows you to operate the stereo microscope with your 
foot. The simulator system software handles the assignment of microscope pedal 
functions.

Eyesi Surgical Simulator – Installation and Operating Guide

48

Operation

Summary of Contents for Eyesi

















































































Reviews:

No comments