VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
18
VERTICAL HEADER PART IDENTIFICATION
PART # 610 151 107, 910 112 133
COMPLIANT PINS
TOP
MATING
END
FACE A
FACE B
RECESSED SHOULDER
FOR INSERTION TOOL
Figure B.
Both faces of the insert are symmetrical.
Figure C
.
Figure A
.
1.
The top/ mating end is located opposite of the compliant pins (
Figure A
).
2.
The compliant pins mate with the PCB via use of VPC Insertion Tool p/n 910 112 133.
3.
The top mates with the VTAC Pass-Thru Insert (
Figure A
).
4.
Each header contains 8 pins/contacts. The faces of the header are symmetrical, so the
first pin located on the end can be considered either pin position 1 or 8 (
Figure B
).
