VZR.2515.001IM
CUBE C-05 tripod turnstile
Installation Manual
27
Figure 9
– Arrangement of the control panel cable wires.
5.3 Access control and management system connection (optional)
The ACS controller should be connected to the terminal group
ACCES_IN and ACCES_OUT.
Identification of terminals: LEFT, RIGHT, STOP, АР, GND. The terminal
assignment is shown in Table 2.
Table 2
– ACS terminal assignment
Identification of terminals
Terminal assignment
LEFT, RIGHT
one-time passage left/ right
(lowest priority)
STOP
passage forbidden (STOP mode)
(medium priority)
GND
common terminal
AP
free passage in both directions (“Antipanic”)
(highest priority)
