Vox Tonelab EX, Owner'S Manual

Page: 39 / 44

35
Connecting to your computer
(USB connection)
If you use a commercially available USB cable to connect the
ToneLab EX to your computer, you’ll be able to use the librar ‐
ian software on your computer to manage user programs,
and use the ToneLab EX as a USB audio interface.
Using librarian software
If you install the USB ‐ MIDI driver on your computer, you’ll
be able to use the dedicated librarian software to back up pro ‐
grams and manage your data library.
Download the USB ‐ MIDI driver and the librarian software
from the manufacturer’s website (www.voxamps.com).
For details on using the librarian software, refer to the
owner’s manual of the librarian software.
Transferring audio data
If the ToneLab EX is connected to your computer via a USB
cable, the ToneLab EX’s effect output can be recorded directly
into an audio track of your DAW software. You’ll also be able
to monitor the audio playback of your software via the
ToneLab EX.
NOTE:
If you’re using Windows, you’ll need to install the
USB ‐ ASIO driver in your computer in order to trans ‐
fer audio data via the USB connector.

Download the USB ‐ ASIO driver from the manufactur ‐
er’s website (www.voxamps.com).
The following illustration shows the signal flow when con ‐
nected to your computer.
USB
OUTPUT
INPUT
Effect
ToneLab EX
The ToneLab EX’s effects will not be applied to the audio
input from the USB connector.