Vox Tonelab EX, Owner'S Manual

Page: 33 / 44

29
4. MULTI DELAY
This is a model of a tape echo unit boasting three playback
heads. You can create ʺ multi ‐ tip ʺ echo effects.
Reverb types
Three types of reverb are provided.
Depending on the position of the knob, this selects the reverb
type (SPRING, ROOM, or HALL) and adjusts the mix
amount of the reverb sound.
HINT:
If reverb is assigned to the expression pedal, the expres ‐
sion pedal will control the input level to the reverb. For
details on how to assign a parameter to the expression
pedal, refer to “Assigning a function to the expression
pedal (Quick Assign)” (p. 31).
1. SPRING
This simulates the spring reverb built into many guitar amps.
2. ROOM
This reverb type simulates a typical room that contains
numerous early reflections.
3. HALL
This models the reverberation of a concert hall containing
numerous echo components.
Tuner
The ToneLab EX has a built ‐ in auto chromatic tuner.
Tuning procedure
1.
To tune your guitar with all effects bypassed, press one
of the program pedals 1–4 (that corresponds to the pro ‐
gram selected in Program Select Mode) for one second.
The Bank/Value display will indicate “ ”.
If you press and hold down the pedal for two seconds,
you can tune with the sound muted. The LEDs will indi ‐
cate the tuning status.
The Bank/Value display will indicate “ ”.
If you’re tuning on stage, we recommend that you use this
method.
HINT:
If the Quick Assign LED or the Bank/Value display is
not blinking, you can also press the EXIT/TUNE
switch to tune with the effects bypassed.
2.
Play a single note on your guitar, and tune the string
approximately so that the desired note name appears in
the Bank/Value display.
The note name is shown as follows.
3.
While watching the LEDs in the tuner section, tune the
guitar string precisely.
Follow the tuning method for the desired tuning mode (p.
30, “Switching tuning mode”).