En-
20
System Settings
1. Master tune
System Settings
The settings that can be made here include overall settings for
this instrument, including master tune, MIDI, controller
functions and so on.
How to configure the settings
1
Press the button assigned to the function you wish to
change, while holding down the EXIT button (see the
diagram above).
The button to which the function is assigned will blink,
and the value will be shown in the VARIATION display of
the ORGAN part. All other VARIATION displays will go
dark.
2
Set the desired value using the ORGAN part VARIATION
,
buttons.
3
Push the button to which the function is assigned, and
apply the settings.
Push the EXIT button to cancel the settings.
Note:
The steps to follow may differ from the above. Refer to
each item for details.
1. Master tune
Sets the tuning for the entire keyboard.
Tuning can be set in cents (1 semitone=100 cents), within a
range of ±50 cents (427.47... 440...452.89 Hz). When the value is
0, the frequency of A4 will be 440 Hz. (Default setting: 0)
1
Hold down the EXIT button and press the SCENE 1 button.
(The SCENE 1 button blinks.)
2
Set the tuning using the ORGAN part VARIATION
,
buttons.
For minus (–) values, a dot appears beside the number on
the right side of the cent value in the VARIATION display.
Press the VARIATION and
,
buttons at the same time
to reset the value to 0.
3
Push the SCENE 1 button to apply the settings.
Push the EXIT button to cancel the settings.
2. MIDI channel
Specifies the MIDI channels on which this instrument will
transmit and receive (from 1–16). (Default setting: 1)
1
Hold down the EXIT button and press the SCENE 2 button.
(The SCENE 2 button blinks.)
2
Specify the MIDI transmission channel using the ORGAN
part VARIATION
,
buttons.
3
Push the SCENE 2 button to apply the settings.
Push the EXIT button to cancel the settings.
3. Lower part MIDI channel
Specifies the MIDI channels (1–16) when using an external
MIDI keyboard as the VOX Continental’s organ LOWER (the
lower part of the keyboard). (Default setting: 2)
1
2
1, 3
1. Master tune
3.
12.
13.
14.
10. Calibrating the pedal
11. Touch sensor calibration (+ power button)
4. Local control
9. Wah pedal control
Lower part
MIDI channel
8. VOX logo LED on/off
5. Velocity curve
2. MIDI channel
Saving the
scene data
Loading the
scene data
7. Auto power off
Restoring the
VOX Continental to
factory-set default
settings (+ power button)
6. Organ key trigger
MIDI IN
MIDI OUT
MIDI cable
ORGAN LOWER (lower keyboard)
ex) MIDI ch. 2
ORGAN UPPER (upper keyboard)
ex) MIDI ch. 1
Summary of Contents for CONTINENTAL-61
Page 27: ...2017 VOX AMPLIFICATION LTD 3 E...
