VOSS 45085, Instruction Manual

Page: 25 / 60

25
45085 - 01.2022 - V1
INSTRUCTION MANUAL VOSS.SONIC 360 FUSION
DE
EN
FR
NL
Info
On delivery, the built-in batteries are partially charged. We
recommend fully charging the batteries in the device when
using it for the first time. To charge the device, see section 9.1.
Set the trigger radius with the radius switch (8) and set the desired
function with the function switch (5).
NOTICE
Make sure that the correct radius is set for the area to
be secured.
As soon as the device is switched on, the red control LED (4) on the
main side (side A) of the device flashes once.
After approx. 10 seconds, the unit triggers once according to the
settings. The red control LED (4) lights up during this time and then
switches off automatically.
The device is ready for operation.
Info
Changing the settings when the device is switched on is not
signalled again by the device. The settings apply automatically
the next time the device is triggered.
9 MAINTENANCE
The device requires little maintenance. However, you should carry
out regular visual inspections. Check the device for damage before
each use. There are no serviceable parts inside the device.
NOTICE
Do not use the device if there is any visible damage.