46
Maintenance
6.3
Cleaning the roller brush
Warning! Risk of electric shock!
• Always switch the device off and disconnect the mains plug on the base
station before all retrofitting, cleaning and maintenance work.
Note! Risk of damage from improper use!
• Never clean the roller brush using liquids. The roller brush is not dish-
washer safe or waterproof.
Clean the roller brush if hair or threads have become wrapped around it.
REMOVING THE ROLLER BRUSH
•
Turn the robot vacuum cleaner upside down.
•
Remove the side brush
1
(see Chapter “6.2 Cleaning the side brush” on page
•
Using both hands, push the latches
2
on each side of the brush cover forward
to unlock.
•
Remove the brush cover
3
.
•
First lift the left side of the roller brush out of the robot vacuum cleaner
4
and then pull the right side away from the axle
5
to remove the roller brush.
CLEANING THE ROLLER BRUSH
•
Remove lint, hair and other dirt from the roller brush.
•
Take care to ensure that the green bearing
6
and metal spherical bearing un-
derneath it on the left-hand side of the roller brush do not come loose.
2
6
4
1
2
3
5
Figure 6.7 Removing the roller brush
