Vorwerk KOBOLD VF200 Instruction Manual Download Page 71

Page: 71 / 109

Maintenance

4.2

Maintaining Kobold VK200 Upright Vacuum Cleaner

Warning! Risk of electric shock!

• Always switch the device off before all retrofitting, cleaning and main-

tenance work and disconnect the mains plug from the socket.

4.2.1 Exchange Kobold FP200 3in1 Premium Filterbag

Caution! Loss of suitability for allergy sufferers!

• Use original Kobold filters and filterbags only.
• Do not reuse spent filterbags.

Note! Risk of damage from improper use!

Dampness in the filter area can damage the device.
• Should the filter area be damp, make sure to dry it before using the

device any further.

• Exchange the 3in1 Premium Filterbag FP200 and the Kobold VK200

motor protection filter.

Vorwerk Premium filter bags can be purchased from the Mail Order

Hotline (see chapter “8 Services” on page 99).

Vorwerk Premium filter bags can also be obtained at our online shop

at www.vorwerk.co.uk

Summary of Contents for KOBOLD VF200














































































































Search results

Summary of Contents for KOBOLD VF200

Reviews:

Vorwerk KOBOLD VF200, Instruction Manual, Page: 71 / 109

Search results

Summary of Contents for KOBOLD VF200

Reviews: