Vorwerk kobold SPB100, User Manual

Page: 55 / 204

55
6.6.4 LED wave symbols at a glance
A
B
C
D
E
A Dry mode
No waves are lit (but the cordless
vacuum cleaner is switched on and
the DuoClean is running). The DuoClean is ready to use and is running in dry mode,
without applying any moisture to the cloth.
B Moisture setting 1
One wave lit. The DuoClean is ready for use, the green function key has
been pressed once, the DuoClean applies moisture to the
cleaning cloth on the lowest setting.
C Moisture setting 2
Two waves lit. The DuoClean is ready for use, the green function key has
been pressed twice, the DuoClean applies moisture to the
cleaning cloth on the medium setting.
D Moisture setting 3
Three waves lit. The DuoClean is ready for use, the green function key has
been pressed three times, the DuoClean applies moisture to
the cleaning cloth on the highest setting.
E Single application of moisture to a dry cloth
All three waves flashing. The DuoClean is ready for use, the green function key has
been pressed down and held, the DuoClean makes the
cleaning cloth completely wet in a single application.
Faults
All waves lit up yellow. The tank is empty.
All waves flashing red. The inspection flap comes open, the DuoClean has absorbed
moisture (see the chapter
Troubleshooting [ } 60] ).
All waves lit up red. The DuoClean has detected a fault.