cable. In some cases (with a strong slagging of the body or with increased sensitivity to
electric fields emitted by coils), this mode may be too strong and causes a rapid reaction
of "overdose". In this case, you should: reduce the session time, use minimal power, or
temporarily switch to a less efficient low-voltage capacitive mode (when the coil is
connected directly to the generator). After successfully passing the "cleaning", it is the
high-voltage capacitive mode (and the flat coil) that can be used later in long sessions
(for example, placing the coil all night in close proximity to the bed) – the coil is in safe
mode (the undesirable electromagnetic field is extremely low, almost at the noise level),
while the healing vortex electrostatic field works effectively even at a distance of 0.5-1 m
(especially if you set the maximum power from the generator).
A. Mishin’s recommendations is: for low-voltage capacitive options enable coils: current
50-150 mA (RMS or RMS), for generator "Live Sinus 5" this corresponds to 50-100% of
capacity (respectively, green and yellow color display panel of the generator). For high-
voltage modes, when the parasitic electromagnetic component of the field is almost at the
noise level, you can safely use large power levels, for example, 200% (red indication
color), which corresponds to 300 mA RMS (via an external application on Android or
Windows, you can set an even larger current). At the same time, you should always listen
to the body's reactions and, in case of unpleasant sensations, the first thing that should be
done logically is to reduce the power level.
The "Live Sinus 5/5BT" kit can be used not only for humans, but also effectively for
animals and plants.
12… Technical specifications
• generation method: DDS (Direct Digital Synthesizers) or direct digital synthesis;
• the shape of the generated signal:
sine,
meander,
triangle
• operating frequency range (sine):
10 kHz ... 1 MHz
• maximum load current (at a supply voltage of 24 V):
700 mA (RMS or RMS value);
1960 mA (peak/peak);
(in stand-alone operation, 3 power levels are available at the load (50, 100, 200 %, the
current of 141 mA RMS of a standard industrial generator is taken as 100 %);
• maximum voltage at the generator output (at a supply voltage of 24 V):
7 V (RMS or root mean square value);
19.8 V (peak/peak);
• auto-tuning modes: