Vortex Impact 850, Manual, Page: 5 / 11

9 8
8
50
Laser Rangef inder
®
r
anging
With the Impact 850 powered up, position the crosshair on
the target object and press and release the Measure button
to get the distance measurement. If the laser is not able
to range due to the reflectivity of the target, you will see a
display similar to that shown here. To range a new target,
simply re-aim and press the Measure button again.
To exit Mode Selection and save settings, press and hold the
Menu button for four seconds. Settings will also save when
Impact powers down automatically.
No
Reflectivity
Displayed
HCD
S
Can
LOS
S
Can
s
can
r
anging
With the Impact powered up, activate
Scan Ranging by pressing and holding
the Measure button down. A blinking “S”
will appear in the lower left corner.
Keeping the button depressed will
continuously measure distance as you
pan the crosshair back and forth across
target objects. Releasing the Measure
button will return laser to the Power Up
Condition.
2. Choose between Yards and Meters Display.
Press the Measure button to toggle between the Yards and
Meters display. Press the Menu button to save your desired
choice.
Choose Between Yards and Meters