Vortex Impact 850, Manual, Page: 4 / 11

7 6
8
50
Laser Rangef inder
®
M
Ode
s
electiOn
Your Impact is factory set to the angle
compensating HCD mode and yards.
To change modes, after the Impact is
powered up activate the Mode Selection
by pressing and holding the Menu button
for at least four seconds. Once the Mode
Selection screen displays, release the button.
As you progress through Mode Selection, you may exit at any
time and save your settings by pressing and holding the Menu
button for at least four seconds—the Impact will then return
to power-up condition.
s
et and
s
ave
M
Ode
s
electiOns
1. Choose between the HCD and LOS Modes.
After activating the Mode Selection, press the Measure
button to toggle between the HCD and LOS displays. Press
the Menu button to save your desired choice and move to
the Yards/Meters selection screen.
Mode Selection
Display
Use the Measure
button to toggle
through each
Mode Selection
option.
Use the Menu
button to activate
the Mode Selection
displays.
Choose Between HCD and LOS