Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents
that may have occured during shipping. Because your scooter was partially assembled and packed
at the factory, there should not be any problems, even if the box has a few scars or dents.
Required Tools
6mm Allen wrench
ASSEMBLY INSTRUCTIONS
INSTRUCTION FOR USE
1
Loosen the collar clamp and slide
it upward. With a clock-wise twisting
motion, push and "thread" the
T-tube onto the fork until it bottoms
out on the fork headset lock nut.
2
With the front wheel pointed
straight ahead, the handlebars
square to the front wheel, securely
tighten the clamp as shown.
WARNING:
Stunt scooters have been built
to certain design specifications. The original
equipment supplied at the time of sale was
selected on the basis of its compatibility with
the frame, fork and all other parts. Certain
aftermarket products may or may not be
compatible.
WARNING:
Failure to properly
install
and tighten the collar clamp may
cause the rider to lose control and fall.
If you do not understand these
instructions or the concept of "tighten
securely" seek the assistance of a
qualified mechanic.