background image

4

English

Please visually inspect all internal and external components 

before connecting to electric current. If any damage is found, 

DO NOT USE THIS UNIT and contact Vornado Air LLC at

1-800-234-0604.

This appliance has a polarized plug. (One blade is wider than 

the other.) To reduce the risk of electrical shock, this plug 

is intended to fit in a polarized outlet only one way. If the 

plug does not fit fully in the outlet, reverse the plug. If it still 

does not fit, contact a qualified electrician. Do not attempt to 

defeat this safety feature.

When using electrical appliances, basic precautions should 

always be followed to reduce the risk of fire, electrical shock 

and injury to persons, including the following:

-  Do Read all instructions before using this Air Cleaner.

-  Do Unplug the Air Cleaner prior to moving or cleaning.

-  

Do Not

 immerse this product in water or allow water to 

drip into the motor housing.

-  To reduce the risk of fire or electric shock, do not use this 

fan with any solid-state speed control device.

-  Always unplug when not in use or when leaving the 

dwelling or premises for extended periods of time.

-  This Air Cleaner requires periodic cleaning. Refer to the 

TIPS for recommended cleaning. 

Do Not 

clean the Air 

Cleaner in any manner other than as instructed in this 

manual.

-  

Do Not

 attempt to repair or replace parts, except for Filters.

-  

Do Not

 use this product on an uneven surface. Always 

place this product on a firm, flat surface.

-  

Do Not

 carry this product by the cord, or use the cord as a 

handle.

-  

Do Not

 operate the Air Cleaner with a damaged cord 

or plug, after the Air Cleaner malfunctions, or has been 

dropped or damaged in any manner. If the supply cord 

is damaged, it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in order to 

avoid a hazard.

-  

Do Not

 run power cord under carpeting.

-  

Do Not

 cover cord with throw rugs, runners or similar 

objects. Arrange the power cord away from traffic areas, so 

it will not become a tripping hazard.

-  

Do Not

 place the Air Cleaner near heat sources such as 

stoves, radiators or heaters.

-  

Do Not

 block the top air vent so purified air cannot be 

circulated throughout the room.

-  

Do Not

 use undiluted bleach or ammonia, strong 

detergents, abrasive cleansers, gasoline, paint thinner or 

IMPORTANT 

INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING.

Summary of Contents for Purio






















Reviews: