VONETS
——
WiFi Bridge/Repeater/Router
3
Chapter 2 Repeater Mode Configuration
Instruction
2.1 Device connect
Power on VONETS device by 5V/2A power supply, then connect to PC, there are two
connection ways as below:
A. Computer is wired connected to LAN port of VONETS device;
（
Recommend Method
）
B. The computer wirelessly connects to the WiFi signal of VONETS device, its default
hotspot parameters are as follows:
Model
WiFi SSID
WiFi Password
VAP11S
VONETS_2.4G_****
12345678
VAP11S-5G
VONETS_5G_****
12345678
（
After the WiFi parameters are configured, the WiFi will be disconnected, that is normal.
）
2.2
Repeater Application Configuration
The configuration steps of VONETS device for WiFi repeater and WiFi bridge are basically
the same, so this manual combines the configuration instructions of the two application
