Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 477 / 700

STARTING AND DRIVING
}}
* Option/accessory. 475
Settings for level control
*
Switch off the level control when the car is to be
jacked up in order to prevent problems with
automatic regulation.
Regulate the level to facilitate loading, or on
entry and exit.
Adjusting loading mode
Use the buttons in the cargo area to regulate the
height of the car's rear section and facilitate
loading and unloading or when connecting or dis-
connecting a trailer.
Settings in the centre display
Entry assistance
The car can be lowered to facilitate entry and exit.
Activating entry assistance via the centre display:
1. Press Settings in the top view.
2. Press My Car Mirrors and Convenience .
3. Select Easy Entry and Exit Suspension
Control .
> When the car is parked and switched off,
the car is lowered (level control stops if a
door is opened and there may be a cer-
tain delay before level control resumes
after the door has been closed). When the
car is started and begins to move, the car
will rise to the height setting for the drive
mode selected.
Disable Leveling Control
In certain cases, the function must be deacti-
vated, e.g. before the car is raised with a jack
*
.
The difference in level created when lifting with a
jack would otherwise mean the automatic control
starting to adjust the height, creating an unde-
sired effect.
Deactivating the function via the centre display:
1. Press Settings
in the top view.
2. Press My Car Parking Brake and
Suspension .
3. Select Disable Leveling Control .
Related information
•
Level control
*
and shock absorption (p. 472)
•
Recommendations for loading (p. 597)
Low speed control
The low speed control function (LSC
11
) facili-
tates and improves traction for driving off-road
and on slippery surfaces, such as with a caravan
on grass or a boat trailer on a launch ramp.
The function is included in drive mode
Off
Road
.
The function is adapted for off-road driving and
driving with a trailer at low speed, up to approx.
40 km/h (25 mph).
With low-speed control, low gears and all-wheel
drive are prioritised, which help to avoid wheel-
spin and provides better traction on all wheels.
The accelerator pedal is less responsive in order
to facilitate traction and speed control at low
speed.
The function is activated together with hill
descent control, (HDC
12
) which means that
speed down steep hills can be controlled with the
accelerator pedal, reducing the need to use the
brake pedal. The system facilitates a low and
even speed while driving on steep downhill gradi-
ents.