Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 234 / 700

CLIMATE
232
Adding and editing time setting for
preconditioning
The timer for preconditioning can manage up to
8 time settings.
Adding a time setting
The button to add a time setting in the Parking climate
tab in the climate view.
1. Open the climate view in the centre display.
2. Select the Parking climate
tab.
3. Press Add timer .
> A pop-up window is shown.
NOTE
It is not possible to add a time setting if there
already are 8 settings entered for the timer.
Delete a time setting in order to be able to
add a new one.
4. Tap on Date
to set the time for a single date.
Tap on
Days
to set the time for one or more
days of the week.
With Days : Activate/deactivate repetition by
ticking/unticking the box for Repeat
weekly
.
5. With Date
: Select the date for precondition-
ing by scrolling the date list with the arrows.
With Days : Select the days of the week for
preconditioning by tapping on the buttons for
the days of the week.
6. Set the time when the preconditioning
should be finished by scrolling with the
arrows.
7. Tap on Confirm in order to add the time set-
ting.
> The time setting is added to the list and is
activated.
WARNING
Do not use preconditioning
7
:
•
In unventilated spaces indoors. Exhaust
gases are emitted if the heater starts.
•
In locations with combustible or flamma-
ble material nearby. Fuel, gas, long grass,
sawdust, etc. may ignite.
•
When there is a risk that the heater’s
exhaust line may be blocked. For exam-
ple, deep snow inside the front right-hand
wheel housing can obstruct the heater’s
ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a long
time in advance.
Editing a time setting
1. Open the climate view in the centre display.
2. Select the Parking climate tab.
3. Press the time setting that is to be changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting" above.
7 Applicable to fuel-driven auxiliary heater.