Volvo XC90 Hybrid 2016, Owner'S Manual

Page: 202 / 546

||
CLIMATE
* Option/accessory, for more information, see Introduction. 200
Automatically activating/deactivating
the seat heating function when the
engine is started
The seat heating
*
can be set to start automati-
cally when the engine is started.
The automatic function starts heating the seats
when the ambient temperature is sufficiently cold.
1. Tap
Settings
in the center display's Top
view.
2. Tap
Climate
.
3. Under
Auto Driver Seat Heating Level
and
Auto Passenger Seat Heating Level
,
select
Off
,
Low
,
Middle
or
High
to activate/
deactivate the automatic function and select
a level for the driver's and passenger's seats.
Related information
•
Climate system controls (p. 188)
•
Climate system controls in the center display
(p. 189)
•
Rear climate system controls on the tunnel
console (p. 190)
Turning front seat ventilation
*
on
and off
Seat ventilation can be used e.g., to help remove
dampness from the seat occupant's clothing.
The ventilation system consists of fans in the
seats and backrests that draw air through the
seat upholstery. The cooling effect increases as
the air in the passenger compartment becomes
cooler. This feature can be activated when the
engine is running and it monitors the seat's tem-
perature, sunlight in the passenger compartment
and the ambient temperature.
Activating/deactivating front seat
ventilation
Steering wheel and seat buttons in the climate bar
1. Tap the left or right side steering wheel and
seat button in the center display's climate
bar to open the steering wheel and seat con-
trols.
If the vehicle is not equipped with the
optional heated steering wheel/seats, the
button for seat ventilation will be directly
accessible in the climate bar.
2. Tap the seat ventilation button repeatedly to
select one of four levels:
Off
,
High
,
Middle
or
Low
.
> The level changes and is displayed in the
button.