Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 616 / 714

||
LOADING, STORAGE AND PASSENGER COMPARTMENT
* Option/accessory. 614
IMPORTANT
The cargo cover may obscure the view to
the rear when in the loading position. Make
sure the cargo cover is fully extended or
fully retracted when driving.
Retracting
1. From the full-cover position:
Lift up the handle and pull it backward to
disengage the cargo cover's attachment
pins and then release.
From loading position:
Grip the handle and pull out the cargo
cover in the grooves - pull to the full-cover
position. Lift up the handle and pull it
backward to disengage the attachment
pins and then release.
2. Retract the cover with its attachment pins
outside of the side panels until it stops in
the retracted position.
Related information
•
Fitting and removing cargo cover
*
(p. 611)
Fitting and removing safety grilles
*
The safety grille prevents loads or pets in the
cargo area from being thrown forward in the
passenger compartment under heavy brak-
ing.
The safety grille is crash-tested in accordance
with the ECE R17 legal requirement and fulfils
Volvo's strength requirements.
For safety reasons, the safety grille must
always be attached and anchored correctly.
WARNING
Under no circumstances may anybody
remain in the cargo area while the car is
moving. This is to avoid injury in the event
of heavy braking or an accident.
Installation
IMPORTANT
The safety grille must only be used in the
rear position (behind the rear seat) descri-
bed here.
Before first installing the safety grille, the
existing plastic roof mountings must be
replaced with steel roof mountings. Volvo rec-
ommends that replacing roof mountings is
performed at an authorised Volvo workshop or
retailer.
1. Fold the rear seat's backrest forward.
2. Make sure that the safety grille is turned in
the right direction. Lift in the safety grille
through one of the rear side doors.