Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 136 / 714

DISPLAYS AND VOICE CONTROL
134
Protect driver profile
In some cases it is preferable not to save vari-
ous settings defined in the car to the active
driver profile. In this case, it is possible to
protect the driver profile.
NOTE
Protecting a driver profile is only possible
when the car is stationary.
To protect a driver profile:
1. Press Settings in the top view in the cen-
tre display.
2. Press System Driver Profiles .
3. Select Edit Profile .
> A menu opens, where the profile can be
edited.
4. Select Protect Profile to protect the pro-
file.
5. Save your profile protection option by
pressing Back / Close .
> When the profile is protected, settings
defined in the car will not be saved
automatically to the profile. Instead,
your changes must be saved manually
under
Settings System Driver
Profiles Edit Profile by pressing
Save current settings to the profile .
When the profile is unprotected, on the
other hand, your settings will be saved
automatically to the profile.
Related information
•
Driver profiles (p. 132)
Linking remote control key to
driver profile
It is possible to link your key to a driver pro-
file. The driver profile along with all of its set-
tings will then be automatically selected
every time the car is used with that specific
remote control key.
The first time the remote control key is used, it
is not linked to any specific driver profile.
When the car is started, the
Guest profile will
automatically be activated.
A driver profile can be selected manually with-
out linking it to the key. When the car is
unlocked, the last active driver profile is acti-
vated. Once the key has been linked to a driver
profile, a driver profile does not need to be
selected when that specific key is used.
Linking a remote control key to a
driver profile
NOTE
Connecting a remote control key to a driver
profile is only possible when the car is sta-
tionary.
First select the profile to be linked to the key,
if the profile to be linked is not already active.