03. DISABLE DIRECT HAZARDS / SAFETY REGULATION
18
1. End charging by pressing the button next to the
charging input socket or via the button in the
center display.
!
IMPORTANT
Before unplugging the charging cable from
the vehicle’s charging input socket, charging
must be ended using the button located next
to the charging input socket. This must be
carried out even if the doors on the vehicle
are already unlocked. If charging is not ended
before the charging cable is disconnected,
this may lead to damage to the charging
cable or to the system.
1
2
2. Depress the lock control in the charging cable
handle - the charging cable’s locked handle
releases/is unlocked. Then unplug the cable
from the vehicle’s charging input socket and
close the hatch.
The charging cable is locked
automatically
If the charging cable is not unplugged from the
charging input socket, it is locked in again automat-
ically shortly after unlocking. The charging cable
can be unplugged again using the button next to
the charging input socket or via the button in the
center display.
Unplugging the charging cable with
the mechanical emergency handle
If the charging cable will not unplug from the
vehicle’s charging input socket when charging has
been ended (via the button next to the charging
input socket, in the center display, or via the
charging station’s user interface) and the vehicle
is equipped with mechanical emergency handle,
follow the instructions below.
WARNING
Before using the emergency handle, check in
the driver display that charging is complete.
Do not use the emergency handle while
charging is in progress. If the charging cannot
be ended, turn off the power to the charging
socket before using the emergency handle.
When the charging cable cannot be unplugged
from the charging input socket, unplug the charging
cable using the mechanical emergency handle.
Ending the charging of
the traction battery
