Volvo XC 60 TWIN ENGINE, Owner'S Manual

Page: 170 / 620

INSTRUMENTS AND CONTROLS
168
Show trip statistics in the centre
display
Trip statistics from the trip computer are dis-
played graphically in the centre display and pro-
vide an overview that facilitates more fuel-effi-
cient driving.
Open the Driver performance
app in app view in order to
show the trip statistics.
Each bar in the diagram sym-
bolises a distance of 1, 10 or
100 km, alternatively miles. The
bars are filled in from the right as driving pro-
gresses. The bar on the far right shows the value
for the current distance.
The average fuel consumption and total driving
time are calculated since the last time the trip
statistics were reset.
Fuel and electricity consumption are shown in
separate graphs. Electricity consumption is "net"
consumption, i.e. energy consumed minus regen-
erated energy created during braking.
Trip statistics from the trip computer
31
.
NOTE
When driving with electric operation, fuel con-
sumption can be indicated in the trip statistics
if the additional heater
32
is running.
Settings for trip statistics
Press Preferences to
•
change graph scale. Select resolution 1, 10
or 100 km/miles for the bar.
•
reset data after every trip. Performed when
the car has been stationary for more than
4 hours.
•
reset data for the current trip.
Trip statistics, calculated average consumption
and total driving time are always reset simultane-
ously.
Change unit
Change the unit for mileage, fuel consumption,
etc. via the centre display as follows:
1. Press Settings in the top view.
2. Press
System System Languages and
Units Units of Measurement .
3. Select the required unit standard: Metric ,
Imperial
or
US
.
Related information
•
Trip computer (p. 164)
•
Show trip data in the driver display (p. 166)
31
The figure is schematic, the layout may vary depending on selected unit standard or updated software.
32 Applicable to fuel-driven auxiliary heater.