Volvo VAH 2013 Operator'S Manual Download Page 7 | Manualshive

Page: 7 / 175

Volvo VAH 2013 Operator'S Manual Download Page 7

Operator's Manual Vehicle Maintenance

General Information

Information For the Owner

If there are questions on the maintenance and performance of your vehicle, please
discuss them with your VOLVO Truck dealer. Your authorized dealer is required to
have trained mechanics, special tools and spare parts to fully service your vehicle.
If necessary, your dealer will contact VOLVO Trucks North America or other
manufacturers for any assistance.

In addition to this Maintenance Manual, there may be additional instruction/operators
manuals supplied by component manufacturers. These manuals are placed in the
Owners Package and placed in the cab. Be sure to read all the manuals thoroughly
before operating the vehicle.

Also, various safety labels may be placed on components by the component
manufacturer. Be sure to read and follow these labels to prevent damage to the
vehicle, personal injury or even death.

Information in this manual refers to VOLVO components and VOLVO drivetrain. For
information regarding the Cummins engine contact Cummins directly. For detailed
information on non-VOLVO engines and/or drivetrains contact your nearest VOLVO
Truck dealer.

Establish a Preventive Maintenance Program with the help of your local VOLVO
Truck dealer. A Preventive Maintenance Program makes it possible to maximize
the amount of time your vehicle is up and running, resulting in longer component
life. This makes for a safer vehicle by reducing any mechanical failures due to poor
maintenance practices.

Note:

Federal law requires manufacturers to notify owners of its products in the event

of a Federal Motor Vehicle Safety Standard or if a safety related defect is discovered.
If you are not the original owner of this vehicle, please notify us about the change in
ownership at the address below or through an authorized VOLVO Truck dealer. This
is the only way we will be able to contact you if necessary.

VOLVO Trucks North America

P. O. Box 26115

Greensboro, NC 27402-6115

United States of America

«
...
5
6
7
8
9
...
»

Summary of Contents for VAH 2013
















































































































































































Reviews:

No comments