Volvo V60 Twin Engine, Owner'S Manual

Page: 116 / 440

||
INSTRUMENTS AND CONTROLS
114
Message Specification
Time for reg-
ular mainte-
nance Time for regular service -
contact a workshop
B
. The
timing is determined by the
number of kilometres driven,
number of months since the
last service, engine running
time and oil grade.
Maintenance
overdue If the service intervals are
not followed then the war-
ranty does not cover any
damaged parts - contact a
workshop
B
.
Transmission
Oil change
needed
Contact a workshop
B
to
check the car as soon as
possible.
Transmission
Reduced per-
formance The gearbox cannot handle
full capacity. Drive carefully
until the message clears
C
.
If shown repeatedly - con-
tact a workshop
B
.
Transmission
hot Reduce
speed
Drive more smoothly or stop
the car in a safe manner.
Disengage the gear and run
the engine at idling speed
until the message clears
C .
Message Specification
Transmission
hot Stop
safely Wait for
cooling Critical fault. Stop the car
immediately in a safe man-
ner and contact a work-
shop
B
.
Temporarily
off
A
A function has been tempo-
rarily switched off and is
reset automatically while
driving or after starting
again.
Low battery
charge Power
save mode The audio system is
switched off to save energy.
Charge the battery.
A Part of message, shown together with information on where the
problem has arisen.
B An authorised Volvo workshop is recommended.
C For more information regarding the automatic gearbox, see
Automatic gearbox - Geartronic (p. 275).
Related information
•
Messages - handling (p. 114)
•
Menu navigation - combined instrument
panel (p. 112)
Messages - handling
Use the left-hand stalk switch to acknowledge
and browse among messages (p. 113) that are
shown in the information display of the com-
bined instrument panel.
When a warning, information or indicator symbol
illuminates, a corresponding message appears in
the display at the same time. An error message is
stored in a memory list until the fault has been
rectified.
Press OK on the left-hand stalk switch to
acknowledge a message. Scroll through mes-
sages with the thumbwheel (p. 112).
NOTE
If a warning message appears while you are
using the trip computer, the message must be
read (press
OK ) before the previous activity
can be resumed.
Related information
•
Menu overview - combined instrument panel
(p. 113)