Volvo V 90 Cross Country, Owner'S Manual

Page: 412 / 594

STARTING AND DRIVING
410
Using the parking brake
Use the parking brake to prevent the car from
rolling from stationary.
Applying the parking brake
1. Pull the control upward.
> The symbol in the driver display illumi-
nates when the parking brake is applied.
2. Check that the car is stationary.
Symbol in the driver display
Symbol Specification
The symbol is illuminated when the
parking brake is applied.
If the symbol flashes, it indicates a
fault has occurred. Read the mes-
sage on the driver display.
Automatic application
The parking brake is applied automatically:
•
if the Auto Hold function (automatic braking
when stationary) is activated and the car has
been stationary approx. 5 minutes.
•
when gear position P is selected on a steep
hill
12
.
•
when the car has been switched off.
Emergency brake
In an emergency, the parking brake can be
applied when the car is in motion by pulling and
holding up the control. Braking stops when the
control is released.
NOTE
An acoustic signal sounds while emergency
braking is active at high speeds.
Releasing the parking brake
Releasing manually
1. Depress the brake pedal firmly.
2. Press the control down.
> The parking brake releases and the sym-
bol in the driver display extinguishes.
12 Applies to automatic gearbox.