Volvo V 90 Cross Country, Owner'S Manual, Page: 152 / 594

||
INSTRUMENTS AND CONTROLS
* Option/accessory. 150
Activating/deactivating the memory
function
The memory function for the rain sensor can be
activated in such a way that the rain sensor but-
ton does not need to be depressed each time the
car is started:
1. Press Settings in the top view in the centre
display.
2. Press
My Car Wipers .
3. Select Rain Sensor Memory
to activate/
deactivate the memory function.
Related information
•
Using windscreen wipers (p. 148)
•
Wiper blades in service position (p. 527)
•
Rear window wiper and washer (p. 151)
Windscreen and headlamp washers
Windscreen and headlamp washers clean the
windscreen and headlamps. Washing/wiping is
started by means of the right-hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
–
Move the right-hand stalk switch toward the
steering wheel to start the windscreen and
headlamp washers.
> The windscreen wipers will make several
more sweeps once the stalk switch has
been released.
IMPORTANT
Avoid activating the washer system when it is
frozen or the washer reservoir is empty, other-
wise there is a risk of damaging the pump.
Heated washer nozzles
*
The washer nozzles are heated automatically in
cold weather to prevent the washer fluid from
freezing.
Headlamp washing
*
To save fluid, the headlamps are washed auto-
matically at every fifth windscreen wash cycle.
Reduced washing
If only approx. 1 litre of washer fluid remains in
the reservoir and the message
Washer fluid
Level low, refill
, together with the symbol,
is shown in the driver display, then the supply of
washer fluid to the headlamps is switched off.
This is in order to prioritise cleaning the wind-
screen and the visibility through it.
Related information
•
Using windscreen wipers (p. 148)
•
Rear window wiper and washer (p. 151)
•
Filling washer fluid (p. 529)